Why you can trust TechRadar
We spend hours testing every product or service we review, so you can be sure you’re buying the best. Find out more about how we test.
Dyson Purifier Hot+Cool Gen1 HP10: two-minute review
Do you have money to spend and want to save on space? If so, the multi-talented Dyson Purifier Hot+Cool Gen1 HP10 purifying fan heater is a compact solution for combating chilly days or hot nights, while helping to purify airborne nasties, too.
The Dyson Purifier Hot+Cool Gen1 HP10 purifying fan heater is available at multiple retailers in the US, UK, and Australia at a list price of $529.99 / £549.99 / AU$899, though I’ve spied the occasional discount in the US from the likes of Dyson and Amazon, who are both offering the HP10 for just under $400 at the time of writing.
The price is on the steep side, considering you can get a far smarter air purifier like the Dyson Purifier Cool Formaldehyde TP09 for a similar price or sometimes less. You can also get the full-sized tower fan version, the Dyson Purifier Cool Gen1 TP10, for a whole $100 / £100 / AU$100 cheaper. Neither has a heat function, admittedly, but if I had the budget, I’d be looking to buy the TP09 when it’s on offer, and buy a separate heater.
At just 30.2 inches / 77cm tall, the HP10 is a stumpier, yet slightly chunkier and heavier, version of the TP10. It’s too chonky to sit on a tabletop, and has a relatively short loop amplifier, but it makes up for this with its ability to be tilted, so it’ll cool more than just your knees – happy days.
The HP10 has a lot of skills to its name, with 10 fan speeds, a multi-temperature heating mode, and oscillation of up to 350 degrees. Thanks to its low noise level, I found it easy to sleep with the HP10 next to my bed, and found the tilting element useful for perfecting the airflow angle.
Auto mode performed well during testing, though it is basic, as it only has the ability to detect and react to PM2.5 and PM10 contaminants. It’s important to note that – as is the case with many other air purifiers on the market rocking a HEPA H13 filter – just because a device may not have the capacity to detect and react to other contaminants like VOCs, it doesn’t mean that it isn’t helping to filter them out.
Overall, I really like the multi-functional format of the Dyson Purifier Hot+Cool Gen1 HP10 purifying fan heater, and was impressed with its performance, so if you’ve got the budget and don’t want a particularly smart air purifier, you won’t be disappointed with the HP10. But personally, if I had the space (and the budget), I’d opt for the smarter TP09 and buy a separate little fan heater for colder days. If you’d like to take a look at other options, I suggest checking out our pick of the best air purifiers and the best fans for options we highly recommend.
Dyson Purifier Hot+Cool Gen1 HP10 review: price & availability
- List price: $529.99 / £549.99 / AU$899
- Available now in the US, UK, and Australia
The Dyson Purifier Hot+Cool Gen1 HP10 purifying fan heater is available to purchase at Dyson, Amazon, and multiple other third-party retailers, and has a list price of $529.99 / £549.99 / AU$899.
This isn’t a terrible price if you’ve got your heart set on a Dyson appliance and desperately want all three functions in one small package. But considering you could get the impressively performing Dyson Purifier Cool Formaldehyde TP09 purifying tower fan for a similar cost, or even less, or spend $100 / £100 / AU$100 less on the taller Dyson Purifier Cool Gen1 TP10 purifying fan and just buy a separate heater, I’d recommend thinking over your priorities before buying.
That being said, the Dyson Purifier Hot+Cool Gen1 HP10 purifying fan heater can occasionally be found for less. For example, it’s “Dyson Week” on the Dyson US website at the time of writing, which has knocked the price down to a far more acceptable $399.99, and Amazon US is offering the HP10 for $399 too, so it’s worth checking if any discounts are available.
The Hot+Cool Gen1 HP10 uses the same filter as many of Dyson’s other purifier models: the 360 Combi Glass HEPA + Carbon air purifier, which has a list price of $79.99 / £75 / AU$99. Dyson recommends the filter be changed every twelve months, based on usage of twelve hours a day, so it’s important to factor this in as an ongoing cost. Most air purifiers need regular filter changes, though some, like the Shark NeverChange or the Blueair Blue Pure 411i Max / Blue Max 3250i, employ helpful washable pre-filters in an attempt to extend the lifespan of their single-use filters.
Overall, if you’re a Dyson fan with the right budget who wants three appliances in one conveniently compact package, you’ll be happy enough with the Dyson Purifier Hot+Cool Gen1 HP10 purifying fan heater. If you’d rather sacrifice a little more floor space over creating a noticeable void in your bank account, however, you may want to consider individual appliances instead.
- Value score: 3.5 out of 5
Dyson Purifier Hot+Cool Gen1 HP10 review: specs
Type | Purifying fan heater |
Fan speeds | 10 |
Oscillation | 45, 90, 180, 350 degrees |
Timer | Yes, in Night mode |
CADR (Clean air delivery rate) | Requested |
Filter | HEPA H13 with activated carbon |
Particle sizes detected | PM2.5, PM10 |
Dimensions | 9.8 x 9.8 x 30.2 inches / 25 x 25 x 77cm |
Weight | 11.7 lbs / 5.3kg |
Control | Onboard power button, remote control |
Additional modes | Auto, Night mode |
Dyson Purifier Hot+Cool Gen1 HP10 review: design and features
- Three functions in one package: cooling, heating, and purifying
- Short in stature, but can be tilted for better airflow position
- No smart features
With its bladeless loop amplifier and metallic details, the Hot+Cool Gen1 HP10 purifying fan heater has the classic Dyson aesthetic we know and love. The white and nickel color of the sample I tested is available in the US, UK, and Australia, but Dyson also offers a white and gold version on their UK site, and a white and silver model in the US.
At first glance, I’d say it’s a little on the short side for a tower fan, and it’s too chunky and heavy to easily fit on a tabletop, but its ability to tilt forward and backward means that the airflow can be easily directed. I think I may actually prefer this format to the taller tower fan loop amplifiers, as the airflow feels a bit more concentrated.
Weighing 11.7lb / 5.3kg, the HP10 is surprisingly heavy for its size, and I can only assume it must be the heating element that makes it heavier than its taller siblings.
Other than the power button, there are no controls on the HP10 itself. All of the controls are accessible via the slightly curved remote, which sits magnetically on top of the loop amplifier when not in use. It houses buttons to increase and decrease the fan speed or heat level, a button to switch back to cool mode, an info button, and buttons to toggle oscillation, auto mode, or Night mode.
By pressing the info button, I could cycle through the different detail screens on the front of the purifying unit. This includes graphs showing air quality changes either recently or over a 24-hour period, PM2.5 and PM10 readings, filter status, and the ambient temperature.
Image 1 of 4
At this price point, it’s a little disappointing that the HP10 doesn’t have any smart features. This means that historical data is limited to the little 24-hour on-screen graph, and control is limited to the remote.
When Auto mode is enabled, the HP10 will react accordingly to rising or falling levels of PM2.5 or PM10 contamination. There’s a timer function that can be used if you don’t want the HP10 running all day if you’re out of the house, but it’s tied in with Night mode, so it can’t be used without the display being dimmed.
The HP10 comes with a 360 Combi Glass HEPA + Carbon air purifier filter, which is an H13-grade HEPA filter and is understood to capture 99.95% of particles as small as 0.2 microns. Though the HP10 only automatically reacts when it detects PM2.5 or PM10 contaminants, it’s worth noting that its HEPA and carbon filter are still capable of capturing other airborne nasties, like VOCs.
Dyson Purifier Hot+Cool Gen1 HP10 review: performance
- Easy to operate
- Tilt function proved useful
- Reacted promptly to PM2.5 and PM10 contaminants
It was really easy to use the Dyson Purifier Hot+Cool Gen1 HP10; all the buttons on the remote were self-explanatory, and it was pleasingly responsive and had a good range.
The Dyson Purifier Hot+Cool Gen1 HP10 reacted quickly when I sprayed dry shampoo toward it from around two feet away. It took just a couple of seconds to detect the contamination, instantly spiking the PM2.5 and PM10 readings, turning them purple to indicate very bad air quality. The readings were lowered to around 30 micrograms in around a minute, which is considered good on Dyson’s air quality scale.
The strength of the airflow was fine for its size, but noticeably less than the larger tower fan models. I could feel a cooling breeze from two feet away on fan speed one, four feet on speed five, and 10 feet on top speed ten.
I felt the benefit from the heat mode pretty quickly. The screen showed a little thermometer with the current room temperature noted, and I could raise or lower the temperature a degree at a time using the plus and minus buttons on the remote.
Night mode worked as expected, with the fan speed dropping to four and the display dimming, either permanently or on a timer of up to eight hours. I liked that I could still increase the fan speed in Night mode, as that means no choosing between light pollution or overheating on a hot night. Being able to tilt the HP10 was also really helpful when setting the airflow to the right angle at bedtime.
The HP10 was lovely and quiet, with a volume of just 30dB when running on fan speed one, 41dB on speed five, and 53dB on speed ten when I tested it. These readings were very similar to those recorded from the TP09 and TP10, with the HP10 operating as quietly as a soft whisper on its lowest setting, and about as loud as moderate rainfall at its highest.
- Performance score: 4.5 out of 5
Should I buy the Dyson Purifier Hot+Cool Gen1 HP10?
Section | Notes | Score |
|---|---|---|
Value for money | The multi-functionality and great performance of the HP10 means you’re getting okay value for money here, but you could get better value for money by purchasing a cheaper Dyson purifying fan and teaming it with a separate fan heater. | 3.5/5 |
Design & Features | The HP10 is a great space-saver, and although it may be a little on the short side, the tilt function makes it easy to direct the airflow. At this price, though, I’d really expect it to have some smart features. | 4/5 |
Performance | All three of the HP10’s functions performed well; it heated up quickly, had strong, cooling airflow, and reacted promptly to contamination during testing. | 4.5/5 |
Buy it if…
Don’t buy it if…
Dyson Purifier Hot+Cool Gen1 HP10 review: Also consider
| Header Cell – Column 0 | Dyson Purifier Hot+Cool Gen1 HP10 | Dyson Purifier Cool Formaldehyde TP09 | Dyson Purifier Cool Gen1 TP10 |
|---|---|---|---|
Type | Purifying fan heater | Purifying tower fan | Purifying tower fan |
Price | $529.99 / £549.99 / AU$899 | $749.99 / £549.99 / AU$999 | $429.99 / £449.99 / AU$799 |
Fan speeds | 10 | 10 | 10 |
Additional modes | Auto, Night mode | Auto, Night mode, Diffused mode | Auto, Night mode |
Oscillation | Up to 350 degrees | Up to 350 degrees | Up to 350 degrees |
Filter | HEPA H13 and activated carbon | HEPA H13 and activated carbon | HEPA H13 and activated carbon |
App support | No | Yes | No |
Dimensions | 9.8 x 9.8 x 30.2 inches / 25 x 25 x 77cm | 8.7 x 8.7 x 41 inches / 22 x 22 x 105cm | 8.7 x 8.7 x 41.3 inches / 22 x 22 x 105cm |
Weight | 11.7 lbs / 5.3kg | 10.7 lbs / 4.85kg | 10.4 lbs / 4.7kg |
How I tested the Dyson Purifier Hot+Cool Gen1 HP10
- I used the Dyson HP10 purifying fan heater in my living room and bedroom
- I observed its detection and purification skills
- I evaluated the strength of the airflow and the sound levels
I used the Dyson Purifier Hot+Cool Gen1 HP10 purifying fan heater in our photo studio, my living room, and my bedroom for two weeks. I evaluated how easy it was to operate, along with the build quality and aesthetics, and explored the available functions and features.
I tested the strength of the airflow by determining at what distance I could still feel a cooling breeze. I also observed the HP10 purifying fan heater’s detection and purification skills during standardized testing, which included spraying dry shampoo towards it from around two feet away to test how quickly it would react and clear the contamination, and I also used it passively in my bedroom and my living room.
I used a decibel meter app on my iPhone to record the noise levels, taking readings from around two feet away and ensuring the fan wasn’t blowing directly into the microphone.
I checked the timer worked as expected, and tested out the sleep mode to see whether the HP10 was quiet enough for me to be able to sleep well with it running overnight.
