As I mentioned above, just because you’re getting a new TV doesn’t necessarily mean you need new HDMI cables, even if you’re upgrading to something with 4K and HDR. Over short distances, say under 6 feet, just about any recent “high-speed HDMI cable” should work fine. “High Speed” and “Ultra High Speed” are the ratings used by HDMI companies to indicate cables that have the bandwidth to handle at least 1080p and 4K resolutions, respectively.
You can think of bandwidth like a pipe. You need to be able to get a lot of “water” through the pipe with 4K and HDR content. A high-speed cable must be “big” enough to handle it all.
The good thing is, if it works, it works. For example, if you’re sending a 4K HDR signal from your 4K Blu-ray player to your 4K HDR TV and the TV shows a 4K HDR signal, you’re set. It’s not possible to get a better image using a different 4K HDMI cable. That’s not how the technology works.
There are only two “fails” with an HDMI cable. The most likely is you won’t get any signal at all: A blank or flashing screen. First, check that everything’s connected correctly and all your HDMI device settings are correct.
A closeup view of the HDMI cable failure known as sparkles.
The only other “fail” mode of HDMI cables is sparkles. This looks like snow on the screen. It can be heavy enough to look like static, like an old TV tuned to a dead channel, or it can be random-but-regular flashes of white pixels. This means you’ll need new cables.
If the TV is receiving the same resolution you’re sending it (e.g., the TV says it’s 4K HDR when you’re sending 4K HDR), you’re all set. A different cable won’t make that image sharper, brighter or anything else.
Also, remember, if one step in your chain isn’t 4K HDR, nothing is. If you connect a 4K Blu-ray disc player to an old soundbar and then to a 4K TV, you won’t be able to get a 4K signal to the TV. Also, some TVs only have one or two HDMI inputs that are HDMI 2.1 (or newer) compatible. Check your owner’s manual for that, too.
